Belling SCIH60 Manual de Serviço descarregar pdf (Página 7)

USING THE HOB

Central On/Off switch

The central on/off switch enables all of

the cooking zones to be switched off

simultaneously at a touch of a key.

To switch on the hob

The hob is switched On by touching

the“ON/OFF” key for 1 sec.

A beep sounds and all the heater displays

show a full stop in the cook zone display.

If the selection of a heater is not done in

10 seconds, the hob will turn off auto-

matically.

The hob is switched Off by touching

the“ON/OFF” key for 1 sec.

A beep sounds and all the heaters are

switched Off.

Switching on an individual hob cook

zone

To switch on a cook zone it is necessary

to actuate every cooking zone by means

oftwooperations:

1) Touch the required cook zone key for

approx 1 second a beep sounds and the

heater display shows the power level with

normal brightness.

The cook zones that are not selected are

dimmed. When the cook zone selec-

tionisnishedafter10seconds,abeep

sounds and all the heater displays that

were dimmed show the power levels with

normal brightness.

2) Select the required power setting using

the up +/down – keys.

Switching off an individual hob cook

zone

Once the cook zone is selected, it can be

switched off by touching the down [-]

and up [+] keys simultaneously. A beep

sounds and the corresponding display

shows “0”.

Power Boost

Temporarily boost the power to a cook

zone by approx 25%, all areas can be

boosted for a period of up to 10 minutes,

After 10 minutes a beep sounds and the

heater will return to level “9”.

Quick Operation

With the cook zone at power level 0,

touch the down [-] key the power level

will raise straight to 9.

With the cook zone at power level 9,

touch the up [+] key the power level will

raise to the Power Boost level and a beep

sounds and the heater display shows “P”.

Griddle Zone

Large pans and griddle plates can be

placed across the two left hand zones.

! Dry or empty Griddles and Frying

pans can heat up very quickly on power

settings greater than 5, this can, if not

closely monitored lead to the induction

showing a overheat warning “Shown by a

ashingC”Theinductionunitwillauto-

matically reduce the power used until the

hobhassufcientlycooleddown.Once

cooled down to an acceptable level the

power will automatically be restored and

theashing“C”willstop.Youcancarry

on cooking using the residual heat why

thehobiscoolingdown“ashingC”.

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comentários a estes Manuais

Sem comentários