Belling SCIH60 Manual de Serviço descarregar pdf (Página 15)

installation

Clearances and dimension – require-

ments

No shelf or overhang of combustible

material should be closer than 650mm

above the hob.

There must be a minimum clearance of

50mm between the edges of the hob

and any side walls; this clearance must

be maintained up to 420mm above the

worktop.

There must be a minimum clearance of

50mm between the rear edge of the hob

and the rear wall. This clearance must

be maintained up to 650mm above the

worktop.

When installing an extractor hood above

the hob, refer to their Manufacturer’s

instructions.

Minimum height to extractor

as recommend in extractor

instruction manual

560mm

50mm min

50mm Min

50mm min

420mm min

490mm

Minimum distance

between carcasses must

be equal to width of hob

650mm min

30mm min /

50mm max

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Sem comentários

Belling SCIH60 Manual de Serviço Página 15