Belling IHK80 Manual de Serviço descarregar pdf (Página 25)

INSTALLATION

Connect to the electricity supply

(For Fixed Wiring only)

Warning: This appliance must be

earthed.

The hob must be installed by a competent

electrician, using a suitable double pole

control unit, with 3mm minimum contact

separation at all poles.

We recommend that the appliance is

connected by a competent person who

is a member of a “Competent Person

Scheme” who will comply with the re-

quired local regulations.

Connection should be made with a

suitable cable.

Important: Ensure that you route all

mains electrical cables well away from

any adjacent heat source, such as an

oven or grill.

Strip the wires & connect to the terminal

block as shown in the diagram & table

below.

Fit the cable clamp & secure with the

screw provided.

Close the terminal box, ensuring that the

cover is engaged on the locking tabs.

Wire Colour Connect to:

Live Brown Terminal 2

Neutral Blue Terminal 4

Earth Yellow/

green

1 2 ... 20 21 22 23 24 25 26 27 28

Comentários a estes Manuais

Sem comentários