Belling IHK80 Manual de Serviço descarregar pdf (Página 23)

INSTALLATION

Protecting the cut-out;

The types of chipboard used for work

surfaces swell relatively quickly in contact

with humidity.

Apply a special varnish or adhesive to

the cut edge to protect it from steam or

condensation which may form under the

work surface under the hob.

This hob can be installed conventionally

(glass above the work top) or recessed

intotheworktopforausht.

Conventional Installation

Apply the self adhesive seal to the un-

derside edges of the hob glass. For best

results, the seal should be adhered along

each side in turn, as close to the edge as

possible, and trimmed at each corner, tak-

ing care to ensure a neat join.

Place the hob in the aperture, checking

the hob glass is covering the work top

along all four sides.

Set the front edge of the appliance paral-

lel with the front of the work top.

Locate and attach the securing clamps

as required, Tighten the screws so that

thehobispulleddownrmlyagainstthe

worktop, thus ensuring a good seal.

Recessed Method (selected models)

Recess the work top to the appropriate

depth(Approx5mm)andshapetotthe

hob (add 1mm to overall glass size.

Apply the self adhesive seal to the

underside of the hob glass. For best

results, the seal should be adhered along

each joint in turn, as close to the edge

as possible, and trimmed at each corner,

taking care to ensure a neat join. Insert

the hob into the recess, ensuring that the

foam seal is sitting correctly.

Locate and attach the securing clamps to

the front and rear underside of the hob,

using the screws provided. Tighten the

screws so that the hob is pulled down

rmlyagainsttheworktop,thusensuring

a good seal.

Youmaywanttollanygapbetweenthe

hob top glass and the work top surface

withsiliconesealant.DONOTtsilicone

sealant under the glass hob instead of

foam seal.

1

1. Self adhesive seal

Worktop

Hob

CONVENTIONAL INSTALLATION

1

Worktop

Hob

RECESSED METHOD

1. Self adhesive seal

2. Silicone sealant

2 1

1

1. Self adhesive seal

Worktop

Hob

CONVENTIONAL INSTALLATION

1

Worktop

Hob

RECESSED METHOD

1. Self adhesive seal

2. Silicone sealant

2 1

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Comentários a estes Manuais

Sem comentários